- Alcohol ether series
- Phenol ether series
- Ester ether series
- Fatty acid ester series
- Emulsifier series
- Special emulsifier series
- Polyethylene glycol (peg) series
- PPG(polypropylene glycol) series
- Polyether series
- Penetrant series
- Additive series
- Defoamer series
- Phosphate series
- Antistatic agent series
- Oil agent series
- Synthetic fat series
- Other auxiliary
- Textile pretreatment auxiliary series
- Printing and dyeing auxiliary series
- Textile Post-processing auxiliary series
Polyester staple fiber spinning oil agent (at a high speed) HAD-08/09
[Range of application]
Anionic surfactant, non-ionic surfactant.
[Quality index]
| Product name | HAD-08 | HAD-09 |
| Main ingredients | non-ionic surfactant | cationic surfactant |
| Appearance (25°C) | yellowish-brown transparent liquid | white cream |
| Active matter | 75 ± 2% | 35 ± 2% |
| pH value | 9.5 ± 1 | 9.5-10.5 |
| Acid value (mgKOH / g) | ≤2 | ≤5 |
| Emulsion stability (1.0%) | 24 hours No delamination | - |
[ Performance and characteristics]
1, this product performance of similar imported oil level, known as the new generation of carbon chain hydrophobic polyester staple fiber finish, spun around when used for processing at the same time, can also be used alone as before spinning or spinning oil after use.
2, the formula using special Antistatic agent, smooth performance, oil adhesion, high film strength, high strength and high modulus fibers to adapt production, has good antistatic properties at high temperature in a dry state can effectively prevent static electricity -
3, can effectively reduce the phenomenon of wrapped rolls, improve product grade rate.
4, to adapt to the speed of downstream users, it can be used for high-speed carding machine, high-speed ring, high-speed spinning.
5, giving the fiber the appropriate coefficient of friction, with good spinnability, to ensure the smooth conduct of textile each step, is not affected by the climate in the textile processing, under the conditions of any humidity to achieve better results.
6, when the spinning fiber left over, less white powder, good yarn quality.
7, the oil component is readily biodegradable, in line with European environmental standards.
[Emulsion preparation]
Method of application: first add desalted water to about 50% of the formulation tank, the ion-exchanged water was heated to 80-85°C, slowly adding a certain amount of HAD-09 oil, stirred for 1.0-1.5 hours to maintain the temperature uniform emulsion , stabilized.
After addition of the remaining 50% desalted water, after maintaining the temperature 60-65°C, adding a certain amount of HAD-08 oil, the emulsion was stirred for one hour to stabilize.
| Oiling position | Oiling method | Oil concentration |
| Winding | Tanker | 0.3% -0.5% |
| Drawing | Dipping | 0.3% -0.5% |
| Folding wire machine | Felt | 2-5% |
[Note]
1, recommend two oil ratio is: HAD-09: HAD-08 to 70:30 or 50:50 (active ingredient).
2, oil of Anionic ingredients easily with water to form a precipitate Ca, Mg plasma, the deployment process must use deionized water.
3, long-term replacement of species or when parking on oil pipeline to be cleaned.
[ Packing, storage and transportation ]
50kg or 200kg plastic drum. non-toxic, non-flammable, storage and transportation are in accordance with the standards of normal chemicals.
Stored in a dry, ventilated place, and the best storage temperature is 10-40ºC. Shelf life: one year.
.jpg){kind=small}